Sharp edges and puncture hazardsWhen you are handling metal, remember the sharp rolled edges. Every employee gets relaxed around metal: when you see your co-workers do this, remind them about the sharp edges. Many hand lacerations are caused by carelessness - losing your grip and not wearing gloves (PPE) while handling metal framing, trash and… read more
The “War on Falls” was declared with only one thing in mind – to prevent injuries by eliminating fall exposures. Zero tolerance and suspensions are merely tools to deal with a violation after it occurs. The ultimate goal is eliminate the exposure in the first place. That can only be accomplished by each and every one of us understanding what is… read more
Safely covering a floor opening with a piece of plywood requires more than just laying down the material over the hole, or even nailing it down.Total on the job safety means a total job of eliminating a hazard. Half a job or inadequate or incomplete jobs of covering hole in the floor. Why did it happen?Although originally nailed down with 8d… read more
Note to Supervisors: Read and prepare for meeting by looking over your jobsite and how your personnel are approaching their jobs. Carelessness is not acceptable.Project Safe states quite simply:Employee Basic Safety Rules, Safe Work Habits: “Careless disregard for the safety of other employees will not be tolerated and is grounds for immediate… read more
How long you work for us is based on how you safely perform your job and meet the production expectations of your supervisor.Every Front Line Supervisor is responsible for timely reporting of all work-related injuries, accidents and fall exposures. To properly carry out his duties, today we are reviewing with all employees, the responsibilities of… read more
All of us have exposed ourselves to possible injury by taking shortcuts when a few extra seconds would have meant doing something the safe way. We did this as children when we jumped the fence instead of using the gate. We do it today when we cross streets between intersections instead of at corners.Many people show disregard for the fact that… read more
Sprains and strains continue to be one of the highest types of injuries within our company. By following a few simple rules, many of these injuries can be avoided or their severity greatly reduced. Medical evidence has shown that performing warm-up exercises before work and after breaks reduces strain and sprain type injuries.These rules are:Warm… read more
Crystalline silica is a common mineral in the earth's crust, and is found in many types of rock including sand, quartz, and granite. Silica is present in both work and non-work environments, and exposure to crystalline silica dust has long been known to cause a disease called silicosis. When you inhale crystalline silica the lung tissue reacts by… read more
ACCIDENTSIn the event an employee is involved in an accident or sustains an injury while on the job, they must report it to their supervisor immediately regardless of its severity. First aid supplies are normally maintained at jobsites to take care of certain minor injuries. When medical attention is warranted, the supervisor will assist the… read more
The Occupational Safety and Health Administration (OSHA), which enforces worker safety laws, has joined with the Transportation Department, other Labor Department agencies and key associations and organizations to enlist the help and cooperation of businesses – large and small – in a nationwide outreach, education, and enforcement effort to stop… read more
Sharp edges and puncture hazardsWhen you are handling metal, remember the sharp rolled edges. Every employee gets relaxed around metal: when you see your co-workers do this, remind them about the sharp edges. Many hand lacerations are caused by carelessness - losing your grip and not wearing gloves (PPE) while handling metal framing, trash and… read more
The “War on Falls” was declared with only one thing in mind – to prevent injuries by eliminating fall exposures. Zero tolerance and suspensions are merely tools to deal with a violation after it occurs. The ultimate goal is eliminate the exposure in the first place. That can only be accomplished by each and every one of us understanding what is… read more
Safely covering a floor opening with a piece of plywood requires more than just laying down the material over the hole, or even nailing it down.Total on the job safety means a total job of eliminating a hazard. Half a job or inadequate or incomplete jobs of covering hole in the floor. Why did it happen?Although originally nailed down with 8d… read more
Sprains and strains continue to be one of the highest types of injuries within our company. By following a few simple rules, many of these injuries can be avoided or their severity greatly reduced. Medical evidence has shown that performing warm-up exercises before work and after breaks reduces strain and sprain type injuries.These rules are:Warm… read more